Vololink VoloAccess Manual do Utilizador descarregar pdf (Página 28)

VoloAccess™ User Manual

The WAN Ethernet page displays the following information:

Network Status

Displays the following:

- WAN Ethernet interface connection status

- the IP Address allocated to the VoloAccess on the Ethernet WAN

- the Subnet Mask

- IP address of the WAN Ethernet Gateway

- IP addresses of the Domain Name Servers (Primary and Secondary)

- MTU (Maximum Transmission Unit).

Traffic Statistics

The number of packets and bytes received (RX) and transmitted (TX).

Settings

The Operating Mode of DHCP should be suitable for most users, however these

items can be configured if necessary. To configure these settings, select Manual

as the Operating Mode.

Operating Mode

From the drop-down list box select the Operating Mode.

The options are:

 Disabled – The Ethernet interface is disabled

 Bridged – The WAN Ethernet port is bridged and operates as a LAN port.

In this configuration, the VoloAccess is a 5 port switch

 Manual – The Ethernet interface can be configured manually

 DHCP – The Ethernet interface will be configured via DHCP

MAC Address

The MAC address of the VoloAccess WAN Ethernet interface

IP Address

The IP Address for the VoloAccess to use on the Ethernet WAN

Netmask

The Netmask of the Ethernet WAN

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 77 78

Sem comentários

Vololink VoloAccess Manual do Utilizador Página 28